KitchenAid 9.76E+13 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} KitchenAid 9.76E+13에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid 9.76E+13 12 페이지. 30" electric freestanding range

페이지 인쇄

Operating position

Move range close to cabinet

opening.

10.

Remove cardboard or

hardboard from under range. Carefully

move range into final position.

11.

Pull drawer open to first stop

position. Lift front of drawer to clear

white wheels in drawer guides. Remove

drawer and set it aside on a protected

surface.

12.

Make sure the anti-tip bracket

is installed:

• Look for the anti-tip bracket securely

attached to floor.

• Slide range back so rear range foot

is under anti-tip bracket.

anti-tip

bracket

range foot

13.

If installing the range in a

mobile home, you must secure the range

to the floor. Any method of securing the

range is adequate as long as it conforms

to the standards in the "Mobile home

installation"section.

14.

Place rack in oven. Place level

on rack, first side to side; then front to

back.

If range is not level, pull range forward

until rear leveling leg is removed from

the anti-tip bracket. Use 3/8" drive ratchet

and channel lock pliers to adjust leveling

legs up or down until range is level. Push

range back into position. Check that rear

leveling leg is engaged in anti-tip

bracket.

NOTE: Oven must be level for

satisfactory baking conditions.

15.

Replace the storage drawer or

lower panel.

16.

Reconnect power.