Makita BFL122F 사용 설명서 - 페이지 4
{카테고리_이름} Makita BFL122F에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BFL122F 16 페이지. Cordless angle screwdriver
Makita BFL122F에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)
페이지 인쇄
ENGLISH
(Original instructions)
1
Red indicator
2
Button
3
Battery cartridge
4
Switch trigger
5
Reversing switch lever
6
Lamp
7
LED indicator
8
Adjusting grip
SPECIFICATIONS
Model
Fastening torque
Angle drive head
No load speed (min
Dimensions
Net weight
Rated voltage
Battery cartridge
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
4
Explanation of general view
9
Ring
10 Angle head
11 Adjusting ring
12 Scale
13 Hole for adjusting grip
14 Yellow line
15 Compression spring
16 Socket
BFL061F
Hard joint
1.5 – 6 N·m
Soft joint
1.5 – 6 N·m
–1
)
470
BFL082F
2 – 8 N·m
2 – 8 N·m
9.5 mm square or 6.35 mm hex
700
422 x 74 x 98 mm
(with Battery Cartridge BL1430)
405 x 74 x 98 mm
(with Battery Cartridge BL1415)
1.7 kg (with Battery Cartridge BL1430)
1.5 kg (with Battery Cartridge BL1415)
D.C. 14.4 V
BL1430 / BL1430A / BL1415
CORDLESS SCREWDRIVER SAFETY
WARNINGS
1.
Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring.
Fasteners contacting a "live" wire may make
ENE033-1
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
GEA010-1
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5.
Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
17 Hole
18 Pin
19 Screw bit
20 Sleeve
21 Limit mark
22 Screwdriver
23 Brush holder cap
BFL122F
BFL202F
5 – 12 N·m
8 – 20 N·m
5 – 12 N·m
8 – 20 N·m
410
220
GEB050-2