James Loudspeakers M1000 사용자 설명서 - 페이지 15
{카테고리_이름} James Loudspeakers M1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. James Loudspeakers M1000 20 페이지. 1000w (4/8 ohm and 70v) dsp subwoofer amplifier
페이지 인쇄
M1000: 1000W DSP SUBWOOFER 4/8 OHM and 70V AMPLIFIER SPECIFICATIONS
GENERAL FEATURES
- High Efficiency, Class D, 1000W RMS (4 ohms) output stage
- DSP signal control for precise adjustment and configuration of the audio signal
- 16x2 character LCD display
- 5 button user interface
- left/right XLR Balanced inputs, RCA unbalanced inputs, and high level binding post inputs for integration
into all systems
- 1 set 5-way binding posts for speaker output connection.
- left/right RCA unbalanced "loop-though" outputs for connecting additional amplifiers and electronics
- 12V trigger input
- 115/230V switchable power supply
- Lock-out mode to prevent accidental changes to settings
- Ability to save 3 separate set-up configurations to memory
DSP FEATURES
Volume:
Subsonic Filter:
Crossover Frequency:
Crossover Slopes:
User EQ:
4 factory Preset EQ settings:
Limiter:
Delay:
Phase:
Mode:
Display Mode:
Memories:
SPECIFICATIONS
Nominal Power output (4 ohms):
Typical Power Output (4 ohms):
THD @1000W (4 ohms)
THD @1W (4 ohms)
Frequency Response
Sub mode:
LFE mode:
S/N ratio:
Output Noise:
Input Sensitivity (for 1000W out)
RCA In:
XLR In:
High Level In:
Line out:
Auto-on Sensitivity:
Auto-off time:
12V trigger:
Power Requirements:
Standby Power:
Dimensions (Height):
(Width):
(Depth):
Net Weight:
Shipping Weight:
Adjustable, 0 to -79dB in 44 steps
Adjustable 24dB/Octave 16-40 Hz, 1 Hz increments
Adjustable 40-160Hz, 1 Hz increments
Adjustable 12dB-36dB/octave, 6 dB increments
9 independent third-octave frequencies (20 Hz -125 Hz)
with +/-6dB range in 0.5 dB increments
Application dependent
Up to 12dB of power reduction in 1dB steps
Up to 30 msecs of delay (in selectable msecs, feet or meter units)
Adjustable 0-315 degrees, 45 degree increments
Sub (crossover) or LFE
display on, or off after 30 sends of inactivity
3 configuration memories for settings.
1000WRMS <1% THD
1080WRMS <1% THD
0.07%
0.08%
10-160 Hz (subsonic and crossover adjustable)
10- 2 kHz (Subsonic adjustable)
100dB Sub/ 90dB LFE
1.5mV Sub/ 2mV LFE
220 mV
220 mV
2.6V
200mV (approx 0 dB gain)
3.2 mV
Adjustable 5 - 30 mins, 5 mins steps
6V DC @ 2ma minimum required to trigger
115V/15A max or 230V/7.5V max
<0.5W
4" (101.5mm) with feet, 3.5" (89 mm) without feet
19" (483 mm) with rack ears, 16.75" (425.5 mm) without rack rears
14.25" (368.5 mm)
26.5 lbs (12 kg)
34 lbs (15.5 kg)
Page 15