Makita BFL301R 사용 설명서 - 페이지 2
{카테고리_이름} Makita BFL301R에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BFL301R 12 페이지. Cordless angle screwdriver
페이지 인쇄
ENGLISH (Original instructions)
SPECIFICATIONS
Model
Fastening torque
Square drive
No load speed (min
Dimensions
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BFL201R, BFL402R
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BFL301R
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Hard joint
Soft joint
-1
)
429 mm x 72 mm x 98 mm
END004-4
ENE033-1
ENG905-1
) : 72 dB(A)
pA
) : 74 dB(A)
pA
BFL201R
10 - 20 N • m
10 - 20 N • m
9.5 mm
360
477 mm x 72 mm x 98 mm
1.7 kg
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We
Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Angle Screwdriver
2
BFL301R
16 - 30 N • m
16 - 30 N • m
9.5 mm
260
477 mm x 72 mm x 98 mm
2.0 kg
D.C. 14.4 V
Wear ear protection
2
) : 2.5 m/s
h
2
Corporation
as
the
BFL402R
25 - 40 N • m
25 - 40 N • m
9.5 mm
200
2.0 kg
ENG900-1
or less
ENG901-1
ENH003-12
responsible