Makita BFL400F 사용 설명서 - 페이지 7
{카테고리_이름} Makita BFL400F에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BFL400F 17 페이지. Cordless angle screwdriver
Makita BFL400F에 대해서도 마찬가지입니다: 기술 정보 (13 페이지), 사용 설명서 (13 페이지), 사용 설명서 (10 페이지)
페이지 인쇄
FUNCTIONAL
DESCRIPTION
1
2
3
1. Battery cartridge
2. Red part
3. Button
1
1. Switch trigger
A
1
1
1. Reversing switch lever
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before adjusting or
checking function on the tool.
Installing or removing battery cartridge
005736
•
Always switch off the tool before insertion or removal of
the battery cartridge.
•
To remove the battery cartridge, withdraw it from the tool
while sliding the button on the front of the cartridge.
•
To insert the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click. If you can see the red part on the
upper side of the button, it is not locked completely.
Insert it fully until the red part cannot be seen. If not, it
may accidentally fall out of the tool, causing injury to you
or someone around you.
•
Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Switch action
005737
CAUTION:
•
Before inserting the battery cartridge into the tool,
always check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
Reversing switch action
005738
CAUTION:
•
Always check the direction of rotation before operation.
B
•
Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
•
When not operating the tool, always set the reversing
switch lever to the neutral position.
7