e-survey E200 사용자 설명서 - 페이지 5

{카테고리_이름} e-survey E200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. e-survey E200 17 페이지.

5 Pin

Front View

1.5 Power button

There is a power button on E200 control panel, the main function as below:

Power On

Power Off

Broadcast Current Working

Mode

Self-check

User can connect to receiver WIFI hotspot with PC, smart phone or tablet. The hotspot

name is the device serial number, can be found under the bottom of the device label.

Open web browser and input the IP address "192.168.10.1". The default user name is

"admin", password is "password". From the website, user can manage working status,

change working mode, configurate basic settings, download raw data, update

firmware and register device.

View basic position information, satellite number, PDOP and time. In static mode, can

start and stop recording here.

Web:

www.esurvey-gnss.com

Long press button for two seconds to power on

receiver.

Long press button for two seconds then release,

will hear the voice "Power off?" Then press the

button again to confirm.

Receiver will broadcast current working mode

when press the power button.

Long press button for two seconds then release,

will hear the voice "Power off?" Then long press

button for three seconds, will hear the voice "self-

check".

E200 User Manual

+12V

Power

GND

Power ground

TXD

Device out

SGD

Signal ground

RXD

Device in