GARCARE GHT06 사용 설명서 - 페이지 4

{카테고리_이름} GARCARE GHT06에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GARCARE GHT06 9 페이지. Corded hedge trimmer

caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) Service
Have your power tools serviced by a qualified repair person using only identical
replacement parts. This will ensure that safety of the power tool is maintained.
Hedge trimmer safety warnings
➢ Keep all parts of the body away from the cutter blade. Do not remove cut
material or hold material to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A moment of inattention while
operating the hedge trimmer may result in serious personal injury.
➢ Carry the hedge trimmer by the handle with the cutter blade stopped. When
transporting or storing the hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce possible personal injury from the
cutter blades.
➢ Keep cable away from cutting area. During operation the cable may be hidden in
shrubs and can be accidentally cut by the blade.
➢ Hold the power tool by insulated gripping surfaces only, because the cutter
blade may contact hidden wiring or its own cord. Cutter blades contacting a "live"
wire may make exposed metal parts of the power tool "live" and could give the
operator an electric shock.
➢ Wear hearing protection.
➢ Recommend to use a residual current device with a tripping current of 30 mA or less.
➢ When cutting, make sure do not touch objects such as wire fences or plants
frame-holder. Doing so can damage the blade beam.
➢ Hold the electric hedge trimmer with both hands firmly, with one hand on the rear and
with the other hand on the front handle. Thumb and fingers must firmly embraced.
Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all
residual risk factors. The following hazards may arise in connection with the
tool's construction and design:
Damage to lungs if an effective dust mask is not worn.
1.
Damage to hearing if effective hearing protection is not worn.
2.
4