Makita BHP453RFE 기술 정보 - 페이지 5
{카테고리_이름} Makita BHP453RFE에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BHP453RFE 6 페이지. 18v cordless hammer driver drill 13mm (1/2")
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Leaf Spring
ASSEMBLING
Leaf spring has to be mounted to Housing set (L)
as illustrated in Fig. 11 before assembling Gear
ass'y and DC motor.
[3]-5. F/R Change Lever
ASSEMBLING
F/R Change lever can be assembled to Switch as
illustrated in Fig. 12.
[3]-6. Cushion
ASSEMBLING
Be sure to install Cushion into Housing set (L) as illustrated in Fig. 13R.
Note: Fig. 13F is the wrong installation. Pay attention to the direction.
Fig. 13R
[Correct]
Housing set (L)
Fig. 11
Fig. 12
Fit the protrusion of Switch into
the notch of F/R Change lever,
and insert the ends of F/R change
lever to the holes of Housing set
(L) and (R).
Fig. 19F
Housing set (L)
Cushion
Housing set (L)
Leaf spring
notch of
F/R change lever
[Wrong]
Cushion
P 5/ 6
Leaf spring
protrusion of Switch