Makita BHR241 기술 정보 - 페이지 8
{카테고리_이름} Makita BHR241에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BHR241 14 페이지. Cordless combination hammer
Makita BHR241에 대해서도 마찬가지입니다: 기술 정보 (14 페이지)
페이지 인쇄
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -7. Impact Bolt Section (cont.)
ASSEMBLING
2) Push Ring spring 28 with Piston cylinder until it fits to the inner groove of Tool holder complete. (Fig. 29)
Fig. 29
Note: Use an extra Piston cylinder as a jig. Never use Piston cylinder that is to be
assembled to the machine.
Piston cylinder
as a repairing jig
Ring spring 28
Tool holder
complete
[3] -8. Swash Bearing Section
DISASSEMBLING
3) Separate Gear housing complete from Motor housing complete. And then, remove Armature from Gear housing complete.
(Refer to Figs. 8 to 10.)
4) Remove Stop ring E-4, Flat washer 5 and Compression spring 6 from pin of Inner housing complete. (Fig. 30)
5) Remove two M4x12 Hex socket bolts that fasten Bearing retainer to Inner housing complete. (Fig. 31)
Fig. 30
Pin of Inner housing complete
Stop ring E-4
Compression spring 6
Piston cylinder
as a repairing jig
Inner groove of
Tool holder complete
Ring spring 28
O ring case
Fig. 31
M4x12 Hex socket
head bolt (2 pcs.)
P 8/ 14