Fringer FR-NZ1 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Fringer FR-NZ1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fringer FR-NZ1 4 페이지. Canon ef to nikon z mount adapter
Fringer FR-NZ1에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지)

페이지 인쇄

turning off the camera or removing the battery from the camera.

2020/2/14

Version 1.10

1. Fixed compatible issues with some of EF/EFS lenses, including (and may not limited

to):

10) Sigma 28/1.4 ART

11) EF50/1.0L

12) EF300/2.8L

13) Tamron 17-50/2.8 VC B005

14) Tamron 24-70/2.8 VC A007

15) ZEISS Otus 55/1.4 ZE

2. Added movie AF speed setting support for the following lens:

Sigma 28/1.4 ART

How to upgrade:

You need a PC or MAC and a USB Micro B cable to upgrade the adapter.

1. Connect the adapter to your computer.

2. Find a new driver named "FRINGER" and copy new firmware to it.

3. Wait for 20 seconds. The adapter will disconnect itself from the computer and reconnect.

If it doesn't reconnect automatically, you may disconnect the USB cable and reconnect it

manually.

4. Check installed firmware version (VERSION.TXT on the adapter)

For example:

Before upgrade:

After upgrade:

Troubleshooting:

Some of the cables in the market are for charging only and not suitable for data transfer.

Thus, if you can't find the "FRINGER" drive when adapter is connected to the computer, check

your cable!