FRIONOR DVS2500 사용 및 유지 관리 지침 - 페이지 8
{카테고리_이름} FRIONOR DVS2500에 대한 사용 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. FRIONOR DVS2500 17 페이지. Vitroceramic cooktop
페이지 인쇄TROUBLESHOOTING
DISPLAY
F0
Fc
Ft / FE
Fb
FU / FJ
FA / FC / Fd
Fr
CLEANING & MAINTENANCE
Remove any residues of food and drops of grease
from the cooking surface by using the special
scraper supplied on request (Figure 6).
Clean the heated area as thoroughly as possible
using suitable products, and a cloth/paper, then
rinse with water and dry with a clean cloth.
Using the special scraper immediately remove
any fragments of aluminium and plastic material
that have unintentionally melted on the heated
cooking area, or residues of sugar or food with a
high sugar content.
8
FAULT
ACTION
Touch control
If error has occurred disconnected and connect
software error.
again the cooktop to the power supply. If error
persist, call after-sales service. If error appears
suddenly in a normal operation, call after-sales
service.
Touch control zone is
Wait until temperature goes down. Cooktop will
too hot and has turned
automatically recovered when temperature reach-
off all the heaters.
es a normal value.
Touch control temper-
Wait until temperature goes down. If message
ature sensor can be
persist when temperature reaches an environment
damaged.
value, call after-sales service.
Excessive sensitivity on
See if cooktop is mounted correctly. Make sure
any key.
that the keys touch correctly the glass surface.
Security keyboard error.
This error is a keyboard auto-check. It disappears
when auto check return to secure value. If error
persist, call after-sales service.
Security software error.
This error is a software auto-check. It disappears
when auto-check return to secure value. If error
persist, call after-sale service.
Relays security error
Any relay driver can have any problemn. Remove
cooktop from the power supply, wait a minute
and switch on again. If error persist, call after-sale
service.
In this way, any damage to the cooktop sur-
face can be prevented. Under no circumstances
should abrasive sponges, or corrosive chemical
detergents, such as oven sprays or stain remov-
ers, be used.
WARNING: Steam cleaners must not be used.