Makita BJS161 기술 정보 - 페이지 4

{카테고리_이름} Makita BJS161에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BJS161 9 페이지. Cordless straight shears 1.6mm (16ga)
Makita BJS161에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

epair

[3] DISASSEMBLY/ASSEMBLY

[3]-1. Center blade (cont.)

ASSEMBLING

(2) Mount the assembled Shearing mechanism to Crank housing complete as illustrated in Figs. 5 and 6.

And, assemble the Crank housing complete to Housing set. Refer to the right illustration in Fig. 2.

Fig. 5

Crank housing

complete

Fig. 6

Teflon wsher 7

Center Blade

Set Thin washer 7 to the both side

of Center blade.

Set Teflon washer 7 to the outside

of Thin washer 7 as illustrated above.

[3]-2. Side blade R, L

DISASSEMBLING

Side blade section can be disassembled as illustrated in Fig. 7.

Fig. 7

Side blade R

Slip plate R

ASSEMBLING

Referr to Fig. 7 and assemble Side blade section. Do not forget to assemble Spacer under the Side blade L.

Dust cover

Note: Refer to Fig. 3

and assemble

the components.

Side blade R

Stop ring E-6

Thin

Washer 7

Pin 7

Crank housing complete

Pass Pin 7 through Crank housing

complete from Side blade R side

as illustrated above.

M5x10 Hex scket

countersunk screw

Side blade L

Spacer

Slip plate L

Remove M5x10 Hex Socket countersunk screw.

Side blade R, L can be removed.

Spacer is mounted between Side blade L and

Slip plate L.

P 4/ 9

Stop Ring E-4

Pin 7

Secure the Pin 7 with

Stop ring E-4.