Makita BO6030 사용 설명서 - 페이지 10

{카테고리_이름} Makita BO6030에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BO6030 17 페이지. Random orbit sander
Makita BO6030에 대해서도 마찬가지입니다: 부품 분석 (2 페이지), 사용 설명서 (14 페이지), 사용 설명서 (8 페이지), 기술 정보 (8 페이지), 사용 설명서 (13 페이지), 사용 설명서 (15 페이지), 사용 설명서 (8 페이지)

페이지 인쇄

1. Notch

2. Guide

OPERATION

Insert the notch of the paper dust bag into the guide of the

003744

paper dust bag holder. Then install the paper dust bag holder

set on the tool.

003745

Sanding operation

003746

CAUTION:

•

Never switch on the tool when it is in contact with the

workpiece, it may cause an injury to operator.

•

Never run the tool without the abrasive disc. You may

seriously damage the pad.

•

Never force the tool. Excessive pressure may decrease

the sanding efficiency, damage the abrasive disc or

shorten tool life.

Hold the tool firmly. Turn the tool on and wait until it attains

full speed. Then gently place the tool on the workpiece sur-

face. Keep the pad flush with the workpiece and apply slight

pressure on the tool.

Polishing operation

CAUTION:

•

Use only a Makita genuine sponge pad, felt pad or wool

pad (optional accessories).

•

Always operate the tool at low speed to prevent work

surfaces from damage/burning.