Makita BO6030 사용 설명서 - 페이지 6

{카테고리_이름} Makita BO6030에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BO6030 8 페이지. Random orbit sander
Makita BO6030에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 부품 분석 (2 페이지), 사용 설명서 (14 페이지), 기술 정보 (8 페이지), 사용 설명서 (13 페이지), 사용 설명서 (15 페이지), 사용 설명서 (8 페이지)

페이지 인쇄
Makita BO6030 사용 설명서
Emptying dust bag
1
003735
1
2
3
003736
When the dust bag is about half full, switch off and
unplug the tool. Hold the tool and remove the dust bag
from the dust nozzle while pressing the push button.
After emptying the dust bag, insert the hook on the dust
nozzle into the rectangular hole on one side of the dust
bag frame and push up the dust bag frame until it clicks
into place on the push button.
003737
Installing paper dust bag (optional accessory)
2
1
3
003742
Place the paper dust bag on the paper dust bag holder
with its front side upward. Insert the front fixing cardboard
of the paper dust bag into the groove of the paper dust
bag holder.
1. Dust nozzle
2. Push button
2
1. Hook
2. Dust nozzle
3. Dust bag
4
4. Push button
1. Groove
2. Front fixing
cardboard
3. Front side of
paper dust bag
Then press the upper part of the front fixing cardboard in
arrow direction to hook it onto the claws.
1
003743
Insert the notch of the paper dust bag into the guide of
the paper dust bag holder. Then install the paper dust
bag holder set on the tool.
1
003744
003745

OPERATION

Sanding operation
003746
CAUTION:
Never switch on the tool when it is in contact with
•
the workpiece, it may cause an injury to operator.
Never run the tool without the abrasive disc. You
•
may seriously damage the pad.
6
1. Claws
2. Upper part
2
1. Notch
2. Guide
2