Makita BO6030 사용 설명서 - 페이지 9
{카테고리_이름} Makita BO6030에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BO6030 13 페이지. Random orbit sander
Makita BO6030에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 부품 분석 (2 페이지), 사용 설명서 (14 페이지), 사용 설명서 (8 페이지), 기술 정보 (8 페이지), 사용 설명서 (15 페이지), 사용 설명서 (8 페이지)
페이지 인쇄
OPERATION
1
1. Sponge pad
1
1. Felt pad
Sanding operation
003746
CAUTION:
•
Never switch on the tool when it is in contact with the workpiece, it may
cause an injury to operator.
•
Never run the tool without the abrasive disc. You may seriously damage
the pad.
•
Never force the tool. Excessive pressure may decrease the sanding
efficiency, damage the abrasive disc or shorten tool life.
Hold the tool firmly. Turn the tool on and wait until it attains full speed. Then
gently place the tool on the workpiece surface. Keep the pad flush with the
workpiece and apply slight pressure on the tool.
Polishing operation
CAUTION:
•
Use only a Makita genuine sponge pad, felt pad or wool pad (optional
accessories).
•
Always operate the tool at low speed to prevent work surfaces from
damage/burning.
•
Never force the tool. Excessive pressure may decrease the polishing
efficiency and cause motor overload, resulting in tool malfunction.
1.
Applying wax
003747
Use an optional sponge pad. Apply wax to the sponge pad or work sur-
face. Run the tool at low speed to smooth out wax.
NOTE:
•
First, wax a non critical portion of the work surface to make sure that the
tool will not scratch the surface or result in uneven waxing.
2.
Removing wax
003748
Use an optional felt pad. Run the tool at low speed to remove wax.
9