Avanti SHP2309B 사용 설명서 - 페이지 9
{카테고리_이름} Avanti SHP2309B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti SHP2309B 16 페이지. Superconductor refrigerator
Avanti SHP2309B에 대해서도 마찬가지입니다: 매뉴얼 (4 페이지)
페이지 인쇄
Temperature Control
Setting the Temperature Control
• Your refrigerator has only one control for regulating the temperature.
The temperature control is located on the rear of the unit.
• To control the internal temperature, adjust the control knob according
to the ambient temperature or purpose of use.
• The first time you turn the unit on, set the temperature control to "5".
• The range of the temperature control is from position "0" to "5".
• After 24 hours, adjust the temperature control to the setting that best
suites your needs. The setting of "3" should be appropriate for home
or office refrigerator use.
NOTE:
Turning the temperature control to "0" position stops the cooling cycle but does not shut off the
power to the appliance.
• After 24 hours, adjust the temperature control to the setting that best suites your needs. The setting of
"3" should be appropriate for home or office refrigerator use.
TO PREVENT LIQUIDS FROM FREEZING YOU MUST ADJUST THE
TEMPERATURE CONTROL TO THE "3" SETTING AFTER THE INITIAL 24 HOUR
PERIOD OF USE.
Interior Light
This refrigerator is provided with a LED light located on the top of the compartment. The light will be
on when the door is opened and be off when the door is closed.
OPERATING YOUR REFRIGERATOR
9