Avanti SHP2501B 사용 설명서 - 페이지 8
{카테고리_이름} Avanti SHP2501B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti SHP2501B 16 페이지. Superconductor refrigerator
Avanti SHP2501B에 대해서도 마찬가지입니다: 매뉴얼 (4 페이지)
페이지 인쇄
Electrical Connection
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.
This refrigerator should be properly grounded for your safety. The power cord of this refrigerator is
equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the
possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
This refrigerator require a standard 115/120 Volt A.C./60Hz electrical outlet with three-prong ground.
Applicable AC adapter / plug has been provided.
The cord should be secured behind the refrigerator and not left exposed or dangling to prevent
accidental injury.
Never unplug the refrigerator by pulling the power cord. Always grip the plug firmly and pull straight
out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified
electrician or service technician install an outlet near the appliance.
Reversing the Door Swing of Your Appliance
This refrigerator has the capability of the door opening from either the left or right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please call customer service for reversal instructions.
Temperature Control
Setting the Temperature Control
Your refrigerator has only one control for regulating the temperature. The temperature control
is located on the upper right hand corner of the compartment.
To control the internal temperature, adjust the control knob according to the ambient
temperature or purpose of use.
The first time you turn the unit on, set the temperature control to "HI".
The range of the temperature control is from position "OFF" to "HI".
After 24 hours, adjust the temperature control to the setting that best suites your needs. The
setting of "MED" should be appropriate for home or office refrigerator use.
Warning
OPERATING YOUR REFRIGERATOR
8