Garde 181FC14 사용자 설명서 - 페이지 3

{카테고리_이름} Garde 181FC14에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garde 181FC14 4 페이지. French fry cutters

Cleaning and Maintenance

1. Release the push block by removing the thumb screws.

2. Release the blade and holder assembly by removing the wing nuts.

3. Carefully remove the blade and holder assembly, as well as the push block.

4. Wash the push block and blade and holder assembly.

a. The blade and holder assembly can be further disassembled for more thorough cleaning by:

• Removing the thumb screws and blade holder plate

• Lightly tapping the blades and spacers to remove them from the holder.

b. To reassemble the blade and holder assembly:

• Put the blade holder on a flat surface with the spacer pockets facing up.

• Insert blade spacers with their slots facing the inner opening of the blade holder.

• Insert blades with cutting edge facing down and slots facing up.

• Insert blades with cutting edge and slots facing down.

• Put the blade holder plate into place and secure it with the thumbscrews.

5. Simply reverse the disassembly instructions to reassemble the fry cutter.

6. When needed, lubricate the guide rods with mineral oil, food grade grease or paraffin. Do not

use cooking oil.

Warranty

1 year free of defects replacement warranty. All products sold under the Garde NSF Manual

Food Preparation Equipment trademark are used for commercial purposes and are guaranteed

to be free from defects in material and construction at the time of shipment. Garde will replace

a defective piece for a period of up to one year from purchase provided the product has been

subject to normal use. Misuse or abuse of the product as interpreted by Garde will void the

warranty. Residential use voids the warranty.

USER MANUAL