Makita BTW072 사용 설명서 - 페이지 16

{카테고리_이름} Makita BTW072에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BTW072 20 페이지. Equipped with electric brake
Makita BTW072에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지), 사용 설명서 (12 페이지), 기술 정보 (10 페이지)

페이지 인쇄

MAINTENANCE

1. Limit mark

1. When the battery cartridge is discharged almost com-

pletely, voltage will drop and the fastening torque will be

reduced.

2. Socket

•

3. Bolt

•

4. The use of the universal joint or the extension bar some-

what reduces the fastening force of the impact wrench.

Compensate by fastening for a longer period of time.

5. Type of materials to be fastened, the manner of holding

the tool and the tool speed will affect the torque.

CAUTION:

•

Always be sure that the tool is switched off and the

battery cartridge is removed before attempting to

perform inspection or maintenance.

Replacing carbon brushes

001145

Remove and check the carbon brushes regularly. Replace

when they wear down to the limit mark. Keep the carbon

brushes clean and free to slip in the holders. Both carbon

brushes should be replaced at the same time. Use only iden-

tical carbon brushes.

Failure to use the correct size socket will cause a

reduction in the fastening torque.

A worn socket (wear on the hex end or square end)

will cause a reduction in the fastening torque.

Even though the torque coefficient and the class of

bolt are the same, the proper fastening torque will

differ according to the diameter of bolt.

Even though the diameters of bolts are the same, the

proper fastening torque will differ according to the

torque coefficient, the class of bolt and the bolt

length.