HIKVISION DS-8100HFI-ST Series 빠른 매뉴얼 - 페이지 4

{카테고리_이름} HIKVISION DS-8100HFI-ST Series에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-8100HFI-ST Series 12 페이지. Pos setup on i/o server and dvr

required for each page. They can be all saved once.

a) Go to page 'Network Settings' and setup the IP, Sub mask and Gateway

accordingly.

b) Go to page 'Serial settings', highlight the POS port, click 'Settings' and setup

the communications parameters accordingly for each port.

c) Go to page 'Operating Settings', highlight the POS port, click 'Settings' and

setup the operation parameters according.

For example for Port No. 1 of POS server 1, the Destination IP Address

is the IP of DVR (Such as 172.6.16.248), and the Destination Port is the

receiving port of DVR (Such as 14006), the Local Port is the port to

identify the POS machine (Such as 9001). And operation mode should

be TCP Client Mode for POS port.

Tip: The above parameters would be also required to setup on the DVR for

communications, the details can be found in Step2.

3 / 12

Menson Qi