Makita DA4030 사용 설명서 - 페이지 6

{카테고리_이름} Makita DA4030에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita DA4030 13 페이지. Angle drill
Makita DA4030에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 사용 설명서 (8 페이지), 사용 설명서 (10 페이지)

페이지 인쇄

Speed change (For Model DA4031)

CAUTION:

*Use the speed change knob only after the tool comes to a complete stop. Changing the

tool speed before the tool stops may damage the tool.

*Always set the speed change knob carefully into the correct position. If you operate the

tool with the speed change knob positioned half-way between the position 1 and the

position 2, the tool may be damaged.

Two speed ranges can be pre-selected with

the speed change knob. Depress the lock

button and turn the speed change knob so

that the pointer points to the position 1 or

position 2.

Position 1 :

300/min.

Position 2: 1,20O/min.

Speed change knob

Torque limiter (For Model DA4031)

The torque limiter will actuate when

certain torque level is reached (for lower speed

setting: position 1). The motor

will

disengage from the output shaft. When this happens,

the bit will stop turning.

Switch handle mounting positions

The switch handle can be rotated to either

90" left or right to fit your work needs.

First, unplug the tool. Press the lock button

and rotate the handle until the

mark on

the lock button is aligned with that on the

motor housing. The handle will be locked in

that position.

Motor

housing

? A

mark