Avanti WCR9000S 사용 설명서 - 페이지 10

{카테고리_이름} Avanti WCR9000S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti WCR9000S 20 페이지.

페이지 인쇄

SPECIAL FEATURES

STORAGE

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able

to store may vary.

NOTE:

Capacity:

Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles

and include bulk storage.

INTERIOR LIGHT

•

You can turn the interior light on or off by pushing the button marked

CONTROL PANEL LOCK

•

Your Wine chiller is equipped with an automatic Control panel lock function. This function will

prevent any unwanted changes to your temperature or power settings.

•

The lock function will activate automatically 12 seconds after the last time a button is pushed on

the control panel.

•

To unlock the control panel lock press and hold the (UP)

simultaneously for 3 seconds the control panel will beep once indicating that the control panel is

active and the settings can be changed.

Your unit is equipped with an ECONOMY (Vacation) MODE. This operating

mode will cut energy consumption by turning off all indicator lights and LED

display while in the ECON mode.

To activate the ECON mode press and hold the ECON selector button until

the green indicator light is illuminated.

To deactivate the ECON mode and return to normal operation, simply press

the ECON selector button again.

A special added feature is a POWER LOSS / OUTAGE indicator and alarm.

In the event of a power outage or loss the PWR LOSS indicator will flash

intermittently and a single alarm will sound.

To reset the alarm simply press the RESET button shown below.

If at anytime the door has been left open or ajar for more than 5 minutes,

the DOOR indicator and alarm will be activated.

The DOOR indicator light will flash intermittently and an alarm will sound

every 60 seconds.

To reset the alarm simply close the door properly or press the RESET

button shown below.

An added feature to your wine cellar is the FILTER replacement indicator.

Once your unit has been in use for 12 months, the FILTER indicator light will

flash intermittently to remind you to change the filter.

After changing the filter press the RESET button shown below to restart the

timing program to remind you again in another 12 months to change the

filter.

The RESET button is used to set-up any of the warning indicators shown

above (PWR LOSS, DOOR, FILTER). Once pressed the above indicators

are reset and returned to their ready state.

and the (DOWN)

buttons