JamHub Tracker MT16 사용자 설명서 - 페이지 8
{카테고리_이름} JamHub Tracker MT16에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. JamHub Tracker MT16 20 페이지. Portable multitrack recorder
JamHub Tracker MT16에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 매뉴얼 (2 페이지)
페이지 인쇄
Tracker MT16™ — User Guide
POWER
Powering Your Tracker MT16
Plug your Tracker MT16 into the wall using the provided 5V DC Adapter. When your
Tracker MT16 is powered on, the PWR light will turn blue and the LCD will display,
Initializing, please wait... Your Tracker MT16 is a fully functioning UNIX computer,
so it will take a moment to boot up. Once the device is ready to go, you will see the
RECORD menu.
TRACKER CONNECTIONS
Connecting Your Tracker MT16
Your Tracker MT16 is designed to connect to a variety of devices, and can be hooked
up in 3 ways: using the built-in inputs, using the JamHub Tracker MT16 Breakout
Cable (sold separately), and using the included JamHub Connect cable.
Connect your Tracker MT16 directly to any mixer using the direct out, patch, or Insert
Jack. The Insert Jack is a specially designed jack for the send and return of effects
loops: rarely used but highly prized space on a mixer.
ON BOARD INPUTS
Your Tracker MT16 has 8 Built-in Mono Inputs
These specially designed jacks will allow you to connect your recorder directly
to a mixer through the insert jacks, or to get creative.
To connect to a mixer's insert jacks, run a stereo cable from your Tracker MT16's
on board inputs to the insert jack. This will give you clean post-trim, pre-fader audio
without affecting the signal on your mixer.
If you would like to connect directly to your Tracker MT16 without using insert jacks,
use a mono cable and only insert it half way into the jack. This will allow you to feed
some instruments and signal paths directly into your recorder when you need to.
© 2014 JamHub Corp. All rights reserved. Product features, specifications, system requirements,
8
and availability are subject to change without notice. Patents Pending.