HIKVISION DS-9016HUHI-F8/N 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} HIKVISION DS-9016HUHI-F8/N에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-9016HUHI-F8/N 17 페이지.

L O C A L A C T I V A T I O N ( c o n t i n u e d )

NOTE: First nine digits after "GUID_" is serial number of unit from which GUID was exported. Digits after

serial number are date of export.

If multiple GUIDs exist for same unit, always use file with latest date.

A GUID can be used only once. Generate and export new GUID once issued GUID has been used.

I N I T I A L I Z E T H E H A R D D R I V E ( I F N E E D E D )

The system is set up to record upon power up and will beep and display "Do you want to initialize drive"

prompt if the hard drive(s) are not initialized.

Go to MENU > SYSTEM CONFIGURATION > HDD.

Use the checkboxes to select the HDDs that need to be initialized.

Press INIT. (Factory installed HDDs come initialized. Initializing again will erase any record video.

This does not affect settings).

 Log In (Unlock Pattern)

1. Draw the unlock pattern to unlock system.

 Log In (Dialog Box)

2. User Name field will be prefilled with

"admin."

3. Input Password (account will lock to prevent

access for 30 minutes if seven incorrect

password attempts are made).

4. Click OK.

5. After the device is activated, the Attention

box pops up.

 Export the GUID Password Recovery File

6. Generate and save GUID (Globally Unique

Identifier) recovery key to be used to reset

password. It is unique to each machine.

1) Insert a USB flash disk into the DVR's

USB port.

2) Click Yes to export GUID recovery key.

Reset Password interface pops up.

3) Navigate to the USB flash disk.

4) Click the New Folder button to create a

folder on the USB flash disk. Name the

folder to identify the machine (e.g.,

"Jones Home, PO3243...").

5) Double click on the new folder to switch

to that location for saving.

6) Click the Export button to export the

GUID file to the USB flash disk. System

will show the saved GUID file.