Lexmark 10G0500 - T 634 B/W Laser Printer 빠른 참조 매뉴얼 - 페이지 6
{카테고리_이름} Lexmark 10G0500 - T 634 B/W Laser Printer에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 10G0500 - T 634 B/W Laser Printer 9 페이지. Setting up the printer base
Lexmark 10G0500 - T 634 B/W Laser Printer에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지)
페이지 인쇄Loading a tray
Load print media into any of the standard or optional trays. All trays are loaded the same way.
1
Remove the tray.
2
Squeeze the width guide tab and the width guide, and slide the guide to the far right side of the tray.
3
Squeeze the length guide lever, and slide the length guide to the correct position for the size paper you are
loading.
4
Place the print media into the tray with the recommended print side face down for single-sided printing and
face up for double-sided printing. Do not load print media above the load line.
5
Squeeze the width guide tab and the width guide, and slide the width guide to the left until it lightly rests
against the edge of the paper stack.
Width guide
Size indicators
tab
Page 6 of 8
Squeeze
Length
guide
Width
guide