Lexmark 12B0104 - W 820 B/W Laser Printer 용지 걸림 지우기 매뉴얼 - 페이지 2
{카테고리_이름} Lexmark 12B0104 - W 820 B/W Laser Printer에 대한 용지 걸림 지우기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 12B0104 - W 820 B/W Laser Printer 2 페이지. Online information
Lexmark 12B0104 - W 820 B/W Laser Printer에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지), 문제 해결 (1 페이지)
페이지 인쇄
Clearing finisher jams
1
Lift the plastic deflector (Deflector G) and pull out any print
media.
Plastic deflector
If you can see print media jammed under the plastic deflector
but can't reach it:
a
Push the finisher latch.
© Copyright 2002 Lexmark International, Inc. All rights reserved.
Printed in France
4/02
E.C. 5B0000A
P/N 12B0250
b
Slide the finisher to the right.
c
Clear the jam.
2
Open Cover H.
3
Clear any jams.
4
Close Cover H.
5
Push the finisher back into place.
6
Open Cover J.
7
Clear any jams from the area of bin 1.
Bin 1
8
Close Cover J.
9
Open Door K.
Bin 2
Right lever
Left lever
Right knob
Left knob
10
Push the left green lever down and to the right and hold it out
of the way. Clear any jams from this area.
11
Release the lever.
12
Push the right green lever down and to the right and hold it
out of the way. Clear any jams from this area.
If you can see print media jammed in this area but can't reach
it, turn the left green knob clockwise to free the print media.
13
Release the lever.
14
Turn the right green knob clockwise to free any print media
that jammed while entering bin 2.
15
Close Door K.
16
Clear any jams from bin 2.
If you still need help
The entire paper path should now be clear. If the printer continues
to display a paper jam message:
1
Turn the printer off and then back on.
2
If the situation persists, check for print media jammed behind
the trays:
a
Remove tray 1 to reach media behind it.
b
Reinstall tray 1.
c
Remove trays 2 and 3 to reach media behind them.
d
Open trays 4 and 5.
e
Remove any print media visible behind trays 4 and 5.
f
Close trays 4 and 5.
g
Reinstall trays 2 and 3.
3
Contact your administrator or Help desk if you need more
assistance.