HIKVISION DS-9116HFI-ST series 빠른 작동 매뉴얼 - 페이지 7

{카테고리_이름} HIKVISION DS-9116HFI-ST series에 대한 빠른 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-9116HFI-ST series 19 페이지. Ds-9100hfi-st series

Quick Operation Guide of DS-9100HFI-ST Series DVR

Peripheral Connections

The alarm input/output interface of the DVR is shown as below:

The alarm input is an open/closed relay. If the input is not an open/closed relay, follow the connection diagram

below:

To connect to an AC/DC load, use the following diagram:

For DC load, JP4 can be used within the limit of 12V/1A safely. If the interface is connected to an AC load, JP4

should be left open. Use an external relay for safety (as shown in the figure above).

There are 4 jumpers (JP4, JP5, JP6, and JP7) on the motherboard, each corresponding with one alarm output. By

default, jumpers are connected. To connect an AC load, jumpers should be removed.

Note:

An external relay is needed to prevent electric shock when connecting to an AC load.

To connect alarm devices to the DVR: