HIKVISION DS-9500 Series NVR 빠른 작동 매뉴얼 - 페이지 6

{카테고리_이름} HIKVISION DS-9500 Series NVR에 대한 빠른 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-9500 Series NVR 19 페이지. Hikvision ds-9500 series nvr

DS-9500 Series NVR Quick Operation Guide

To connect to an AC/DC load, use the following diagram:

For DC load, JP4 can be used within the limit of 12V/1A safely. If the interface is connected to an AC load, JP4 should be left

ope n. Use an external relay for safety (as show n in the figure above).

Note:

An external relay is needed to prevent electric shock when connecting to an AC load.

Alarm Connections:

The device provides the green mating plugs for alarm input and alarm output connectors. Operate the following steps:

1. Remove the green mating plug from the ALARM IN or ALARM OUT connector.

2. Use the screwdriver to loosen the screw in the plug and then place the wire to the top o f screw and finally tighten the screw

to secure the wires.

3. Insert the pl ug to its mating slot.

NVR

Relay alarm

output

NVR

Relay alarm

input

NVR

Relay alarm

input