HIKVISION DS-9600 Series 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} HIKVISION DS-9600 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-9600 Series 13 페이지. Hybrid dvr, nvr, analog dvr

10. Add IP Cameras

Directly on the Hybrid DVR and NVR's Menu:

1. Enter the Add/Remove Cameras menu by going to Main Menu > Cameras Setup > Add/Remove Cameras.

2. Select the IPC tab.

3. Click the Discover button to automatically detect connected IP cameras on the network.

4. If the detected IP cameras and DVR are not on the same subnet, you can modify the cameras' IP,

subnet and port settings.

5. Click the Test Connection button to test if the IP camera was connected successfully or not.

6. Click the Add button to add the IP camera to the Added Cameras list.

7. Once an IP camera has been added to the Added Cameras list, you may remove the camera by clicking

the Trashcan icon or view the camera by clicking the Play icon.

8. Click the Done button to save settings and return to the previous menu.

9. Go to Main Menu > Recording Configuration > Recording Quality Settings to setup IP camera

recording resolution, frame rate, etc.

Using Internet Explorer

1. Connect to the DVR by typing the IP address in the address bar

2. Login to the DVR as above.

3. Click on Config > Remote Config > IP Camera

4. Enter the camera IP Address and other appropriate information on the right side of the screen.

5. Click Modify to save your settings.

6. Repeat to add more cameras.