HIKVISION DS-9600NI-ST Series 빠른 매뉴얼 - 페이지 3

{카테고리_이름} HIKVISION DS-9600NI-ST Series에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-9600NI-ST Series 6 페이지. Cameras, dvrs
HIKVISION DS-9600NI-ST Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지)

페이지 인쇄

Active IP Device by Creating Strong Password



Activation via SADP Software (V2.2.3.5)



SADP software is used for detecting the online device, activating the IP Device, and resetting the

password.



Get the SADP software from the supplied disk or the official website, and install the SADP

according to the prompts. Follow the steps to activate the camera.

Steps:

Select the device which is in inactive status. You can also select multiple inactive devices for activating

them simultaneously with the same password.

In the Device Activation field, create a password for the device and confirm the password.

STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of your

own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,

numbers, and special characters) in order to increase the security of your product. And we

recommend you reset your password regularly, especially in the high security system, resetting the

password monthly or weekly can better protect your product.

You can check whether the activation is completed on the popup

window. If activation failed, please make sure that the password meets

the requirement and try again.

Change the device IP address to the same subnet with your computer

by either modifying the IP address manually or "Click" the checkbox of

Enable DHCP.

Input the password you just created and click the Save button to

activate your IP address modification.

V20150706