Garden Games Playhouses Whacky & Crooked Tower 사용 설명서 - 페이지 8

{카테고리_이름} Garden Games Playhouses Whacky & Crooked Tower에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Games Playhouses Whacky & Crooked Tower 12 페이지.

You will need:

Leg Support Braces x 8 (parts 28)

16 x Screws D (4 x 50mm)

Secure the base of the frame using eight support struts

(parts 28) to attach diagonally between leg and frame.

These are screwed in place using two Screws 'D' for each

brace.

You will need:

Pre-assembled Playhouse Tower Base from Steps 5 - 7

House Floor Frame Pieces - Parts 33 (x 2), 34 (x 2) and 35 (x 1)

14 x Screws A (4 x 50mm)

Create the frame for the house floor by screwing together parts 33, 34 and 35 in the formation as shown in

diagram 10a below. Use ten Screws 'A' to fix together the frame.

Then use a further four Screws 'A' to attach the frame on top of the main base frame (see diagram 10b - frame is

highlighted in green).

part 33

part 34

You will need:

Pre-assembled Playhouse Tower Base from Steps 5 - 8

Veranda Floor (part 22)

Playhouse Floor panels x 2 (parts 17)

Place the veranda floor onto the playhouse tower base. This should just slot into place. Then place the two floor

panels in place and secure using four Screws ''C' .

Building the Tower Platform: Attach the Leg Support Braces

Building the Tower Platform: Creating the Frame for the House Floor

part 34

part 35

part 33

Screw

diagram10a

Building the Tower Platform: Adding the Veranda and Floor Panels

x10

4 x Screws C (5 x 80mm)

Screw

diagram 9

diagram10b

x16

Screw