Avanti BCA5105SG-1 사용 설명서 - 페이지 9

{카테고리_이름} Avanti BCA5105SG-1에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti BCA5105SG-1 20 페이지. Avanti products refrigerator parts list
Avanti BCA5105SG-1에 대해서도 마찬가지입니다: 부품 목록 (2 페이지)

페이지 인쇄

 INSTALLING STAINLESS STEEL HANDLE (MODEL BCA5105SG-1 ONLY)

This wine cellar includes a stainless steel handle that is not required to operate this unit.

To install the handle please follow the below instructions:

For your convenience the screws used in the installation of the handle have been put in place at the

factory.

1. Pull away the door gasket in the area where the handle is to be installed on the left side as

shown below in Illustration # 1. The gasket is easily displaced by hand, no tools are

necessary.

2. Align the handle with the screws installed. Tighten the screws using a Phillips head

screwdriver until the handle sets both flush and secured tightly against the door frame. (DO

NOT over tighten as this will cause damage to the handle assembly).

3. Replace the door gasket to its original position.

4. If you choose not to use the handle supplied, simply follow step 1 to access the installation

screws and remove them and then place the two decorative plugs into the two holes

separately. Continue on to step 3 to replace the door gasket to its original position.

Illustration # 1

Gasket

Phillips Head Screw

Illustration # 2

Phillips Head Screw Driver

Handle