Avanti BCAD353 사용 설명서 - 페이지 9
{카테고리_이름} Avanti BCAD353에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti BCAD353 20 페이지. Beverage cooler
페이지 인쇄
BEFORE USING YOUR BEVERAGE COOLER
•
Remove the exterior and interior packing.
•
Check to be sure you have all of the following parts:
1
Instruction Manual
5
Beverage Shelves
2
Keys
•
Before connecting this appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
INSTALLATION OF YOUR BEVERAGE COOLER
•
This appliance is designed to be for free standing installation only.
•
Place your Beverage Cooler on a floor that is strong enough to support it when it is fully
loaded.
•
Your Beverage Cooler is designed to either be free standing in a fixed position or moveable
using the casters located at the rear of the unit.
•
Locate the Beverage Cooler away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase
electrical consumption. Extreme cold ambient temperatures may also cause the unit not to
perform properly.
•
Avoid locating the unit in moist areas.
•
Plug the Beverage Cooler into an exclusive, properly installed-grounded wall outlet. Do not
under any circumstances cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certified electrician
or an authorized Avanti Products service center.
INSTALLATION INSTRUCTIONS
9