Lexmark 20G0500 - T 640dtn B/W Laser Printer 문제 해결 매뉴얼 - 페이지 6
{카테고리_이름} Lexmark 20G0500 - T 640dtn B/W Laser Printer에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 20G0500 - T 640dtn B/W Laser Printer 6 페이지. Troubleshooting guide
Lexmark 20G0500 - T 640dtn B/W Laser Printer에 대해서도 마찬가지입니다: 용지함 적재 (2 페이지), 설정 및 설치 (4 페이지)
페이지 인쇄
The job prints, but the top and side
margins are incorrect
•
Make sure the Paper Size setting in the Paper
menu is correct.
•
Make sure the margins are set correctly in your
software application.
Ghost images appear
•
Make sure the Paper Type setting in the Paper
menu is correct.
•
Verify the environment is Class B.
•
Replace the charge rolls.
•
Replace the print cartridge.
•
Replace the photoconductor kit.
Some of the print is cut off on the
sides, top, or bottom of the media
Move the guides in the tray to the proper positions for
the size loaded.
Print is skewed or inappropriately
slanted
Move the guides in the tray to the proper positions for
the size loaded.
Transparency print quality is poor.
•
Use only transparencies recommended by the
printer manufacturer.
•
Make sure the Paper Type setting in the Paper
menu is set to Transparency.