Avanti WD99PS 사용 설명서 - 페이지 9

{카테고리_이름} Avanti WD99PS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti WD99PS 18 페이지.

Cup Dispenser (Optional)

A cup dispenser may be installed by using the mounting holes (covered with plastic caps) located

near the top of the right side panel of the cooler. The cup dispenser comes equipped with a mounting

bracket and screws and may be ordered by completing the enclosed order form provided with your

instruction manual.



Wash the inside of the reservoir with a warm water and baking soda solution. The solution should

be about 2 tablespoons of baking soda to a quart of water.



The drip tray and water faucets should be cleaned with mild detergent and warm water.



At regular intervals or once a month inspect the coils located across the back of the dispenser.

Vacuum accumulation of dust or clean it with a soft bristled brush.



If the water dispenser will not be used for a long period of time, unplug the power cord from the

wall outlet.



Drain the water through the faucets.



Turn the switch market hot to the "OFF" position.



Drain the water from the tank by removing the plug from the back of the dispenser.

WARNING—THE WATER COMING OUT OF THE BACK SIDE MARKED "HOT" MAY BE SCOLDING.



Unit should not be transported on the sides. Place it upright if possible and cover it with a

blanket.

TAKING DISPENSER OUT OF SERVICE