Avanti WDE98PS 사용 설명서 - 페이지 8

{카테고리_이름} Avanti WDE98PS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti WDE98PS 15 페이지. Avanti products water dispenser - electric cold water dispenser user manual

페이지 인쇄

Electronic Controls

NOTE: At any time during the program set up, if no activity is chosen the screen will reset after 10

seconds have passed.

POWER Function:

Press Power button onc e to power unit ON. The unit is in stand-by mode and the time will be displayed

on the upper left corner of the display window. To switch OFF the power, just push the Power button

again.

Clock Display

Press the SET button to adjust the time. Once pressed, the time will flash. Using the HOT (+) or COLD

(-) buttons you can adjust the "hour" display AM / PM. Press the SET button again to adjust the

minutes. Using the HOT (+) or COLD (-) buttons you can adjust the "minutes" display.

Wait for the display to stop blinking (approximately 10 seconds).

TEMPERATURE DISPLAY

HOT Function.

Press the HOT button once to turn on the hot function.

Press the SET button (3 times) the amber numbers appear on the left side of the display panel. Using

the HOT (+) or COLD (-) buttons you can adjust the temperature to the desired setting. Wait for the

display to stop blinking (approximately 10 seconds).

COLD Function

Press the COLD button once to turn on the cold function.

Press the SET button (4 times) the blue numbers appear on the right side of the display panel. Using the

HOT (+) or COLD (-) buttons you can adjust the temperature to the desired setting. Wait for the display

to stop blinking (approximately 10 seconds).

NOTE: Once the selected temperature is reached, the readout will display it. Since it may take a while to

reach the selected temperature, you will be able to see in numerical sequence (plus or minus) other

temperature readings.

COLD Water temperature range is from 41ºF-59F (5ºC-15ºC). The factory-preset setting is 6ºC/45ºF.

HOT Water temperature range is from 122ºF-198ºF (50ºC-92ºC). The factory-preset setting is

91ºC/196ºF.

Cº/Fº Function:

Press Cº/Fº button to convert temperature display from Celsius to Fahrenheit or visa versa.