JAMO JSS4-TS 매뉴얼 - 페이지 3

{카테고리_이름} JAMO JSS4-TS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. JAMO JSS4-TS 4 페이지.

All manuals and user guides at all-guides.com

Connection

To make a connection, strip about ¼in of insulation from the end, twist any loose strands toget-

her tightly so that no loose end sticks out to cause problems with short circuits. Make the

connection by unscrewing the binding post counterclockwise and exposing the wire hole. Insert

the stripped wire end into the wire hole and tighten the binding post by turning it clockwise.

Make sure the metal conductor contacts the stripped part of the wire, not the insulation, and

there are no loose strands to cause problem short circuits.

Observe polarity when making connections, making sure +(plus) goes to + (plus), - (minus) goes

to (minus) and that the channels are not crossed. Improper connections can cause the system

to be inoperative or less than optimum.

Following the same precautions, connect the speaker wires to the appropriate JSS4 terminals

marked output.