Avanti IM20SS 사용 설명서 - 페이지 7

{카테고리_이름} Avanti IM20SS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti IM20SS 17 페이지. Avanti products ice maker

PRONG FROM THE POWER CORD. ANY QUESTIONS CONCERNING POWER AND OR

GROUNDING SHOULD BE DIRECTED TOWARD A CERTIFIED ELECTRICIAN OR AN

AUTHORIZED AVANTI PRODUCTS SERVICE CENTER.

ELECTRICAL CONNECTION

IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL

SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED

AVANTI PRODUCTS SERVICE CENTER.

THIS ICE MAKER SHOULD BE PROPERLY GROUNDED FOR YOUR SAFETY. THE POWER

CORD OF THIS ICE MAKER IS EQUIPPED WITH A THREE-PRONG PLUG WHICH MATES WITH

STANDARD THREE PRONG WALL OUTLETS TO MINIMIZE THE POSSIBILITY OF ELECTRICAL

SHOCK.

D O NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD GROUND PRONG

FROM THE POWER CORD SUPPLIED.

NEVER USE AN EXTENSION CORD TO CONNECT POWER TO THE UNIT.

NEVER USE A TWO-PRONG GROUNDING ADAPTER.

WHERE A TWO-PRONG WALL RECEPTACLE IS ENCOUNTERED, CONTACT A QUALIFIED

ELECTRICIAN TO HAVE IT REPLACED WITH A 3-PRONG RECEPTACLE IN ACCORDANCE

WITH APPLICABLE ELECTRICAL CODES.

THIS ICE MAKER REQUIRES A STANDARD 115/120 VOLTS A.C.~/60HZ ELECTRICAL OUTLET

WITH THREE-PRONG GROUND.

THE CORD SHOULD BE SECURED BEHIND THE ICE MAKER AND NOT LEFT EXPOSED OR

DAN GLING TO PREVENT ACCIDENTAL INJURY.

1. CONNECTING THE WATER SUPPLY

IMPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING

REVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLATION

ALL THE NECESSARY HARDWARE IS NOT PROVIDED FOR INSTALLATION SO IT IS

NECESSARY TO HIRE A PROFESSIONAL LICENSED PLUMBER TO COMPLETE THE

INSTALLATION.

CONNECT TUBING (SUPPLIED WITH UNIT) TO THE NEAREST COLD WATER SOURCE.

CONNECT SUFFICIENT TUBING TO THE UNIT TO ALLOW THE APPLIANCE TO BE MOVED

FREELY FOR CLEANING AND SERVICE. ALSO MAKE SURE THAT THE TUBING IS NOT

PINCHED OR DAMAGED DURING TRANSPORTATION.

POSITION UNIT TO ALLOW FREE AIRFLOW THROUGH THE FRONT GRILL (

WIPE OUT INSIDE OF UNIT AND ICE BUCKET WITH A DAMP CLOTH.

WARNING

YOU MUST USE A LICENSED PLUMBER

SKETCH 1

1).

SEE SKETCH