Lexmark 21Z0180 - C 935hdn Color Laser Printer 연결 매뉴얼
{카테고리_이름} Lexmark 21Z0180 - C 935hdn Color Laser Printer에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 21Z0180 - C 935hdn Color Laser Printer 6 페이지. Lexmark c935dn: specifications
Lexmark 21Z0180 - C 935hdn Color Laser Printer에 대해서도 마찬가지입니다: 브로셔 (2 페이지), 브로셔 (5 페이지), 설정 (2 페이지), 빠른 참조 (10 페이지), 인쇄 매뉴얼 (4 페이지), 사양 (4 페이지)
페이지 인쇄
Connectivity guide
Windows instructions for a locally attached printer
Note: When installing a locally attached printer, if the operating system is not supported by the Software and
Documentation CD, the Add Printer Wizard must be used.
Updates for the printer software may be available on the Lexmark Web site at www.lexmark.com.
What is local printing?
Local printing is printing to a locally attached printer (a printer that is connected directly to your computer with a USB
or parallel cable). When setting up this type of printer with a USB cable, you should install the printer software
before connecting the USB cable. For more information, see the setup documentation.
The Software and Documentation CD can be used to install the necessary printer software on most Windows operating
systems.
Installing software using the CD
Using the Software and Documentation CD, you can install printer software for the following operating systems:
•
Windows Vista
•
Windows Server 2003 and Windows Server 2003 x64
•
Windows XP and Windows XP x64 bit Edition
•
Windows 2000
•
Windows Me
•
Windows NT 4.0
•
Windows 98 Second Edition (USB not supported)
1
Insert the Software and Documentation CD.
If the install screen does not appear, click Start
your CD-ROM drive.
2
Select Install Printer and Software.
3
Select Suggested, and then click Next.
4
Select Local Attach, and then click Next. The printer software is copied to your computer.
5
Connect the USB or parallel cable, and then turn on the printer.
The Plug and Play screen appears, and a printer object is created in the Printers folder.
Installing software using the Add Printer Wizard
You can install printer software for the following operating systems:
•
Windows 98 First Edition (USB not supported)
•
Windows 95 (USB not supported)
1
Insert the Software and Documentation CD.
If the CD automatically starts, click Exit.
2
Click Start
Settings
3
When prompted, select to install a local printer, and then click Have Disk.
Run, and then type D:\setup.exe, where D is the letter of
Printers, and then click Add Printer to start the Add Printer Wizard.
Connectivity guide
Page 1 of 6