Lexmark 21Z0294 - C 935dttn Color Laser Printer 인쇄 매뉴얼 - 페이지 4
{카테고리_이름} Lexmark 21Z0294 - C 935dttn Color Laser Printer에 대한 인쇄 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 21Z0294 - C 935dttn Color Laser Printer 4 페이지. Lexmark c935: supplementary guide
Lexmark 21Z0294 - C 935dttn Color Laser Printer에 대해서도 마찬가지입니다: 설정 (2 페이지), 빠른 참조 (10 페이지)
페이지 인쇄
3
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
4
Load the paper stack with the recommended print side faceup.
5
Make sure the paper guides are secure against the edges of the paper.
6
Insert the tray into the printer.
7
If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting
for the tray from the control panel.
Setting the Paper Size and Paper Type
The Paper Size setting is determined by the position of the paper guides in the tray for all trays except the multipurpose
feeder. The Paper Size setting for the multipurpose feeder must be set manually. The factory default Paper Type setting
is Plain Paper. The Paper Type setting must be set manually for all trays that do not contain plain paper.
1
Make sure the printer is on and Ready appears.
2
From the control panel, press
3
Press
repeatedly until
4
Press
repeatedly until
5
Press
repeatedly until the correct tray appears, and then press
6
Press
repeatedly until
7
Press
or
repeatedly until the correct Paper Type setting appears, and then press
Submitting Selection appears.
.
Paper Menu appears, and then press
Paper Size/Type appears, and then press
appears next to the correct size, and then press
Printing guide
Page 4 of 4
.
.
.
.
.