Lexmark 21Z0300 - Laser Printer Government Compliant 인쇄 매뉴얼 - 페이지 2
{카테고리_이름} Lexmark 21Z0300 - Laser Printer Government Compliant에 대한 인쇄 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 21Z0300 - Laser Printer Government Compliant 4 페이지. Lexmark c935: supplementary guide
Lexmark 21Z0300 - Laser Printer Government Compliant에 대해서도 마찬가지입니다: 빠른 참조 (10 페이지)
페이지 인쇄
3
Squeeze the length guide tab inward as shown, and slide the guide to the correct position for the paper size being
loaded.
Note: Use the size indicators on the bottom of the tray to help position the guides.
4
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
5
Load the paper stack with the recommended print side faceup. Load the paper in either the long-edge or short-edge
orientation as shown below:
Notes:
•
Load sizes larger than A4 in the short-edge orientation.
•
Paper must be loaded in the short-edge orientation to create booklets if the optional booklet finisher is installed.
Long-edge orientation
6
Make sure the paper guides are secure against the edges of the paper.
Printing guide
Page 2 of 4
Short-edge orientation