Lexmark 2200 Series 설정 - 페이지 5
{카테고리_이름} Lexmark 2200 Series에 대한 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 2200 Series 11 페이지. Lexmark 2200: document
Lexmark 2200 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지)
페이지 인쇄
Setup troubleshooting
When your All-In-One has a problem, before contacting Lexmark Customer
Support, check the following items.
Make sure:
•
You have only one Lexmark 2200 Series attached to your computer.
•
You are using one of the following supported operating systems:
• Windows 98
• Windows XP
• Windows Me
•
The power cord is firmly attached to the All-In-One and an electrical outlet.
•
The USB cable is securely attached to your computer and to your printer.
•
Your printer is on.
Note: If your All-In-One is on, the Power button is lit.
•
The computer is on if you are scanning or printing.
•
You removed the sticker and tape from the bottom of the print cartridges.
•
You installed the print cartridges correctly.
The color print cartridge is secure in the left carrier and the black print
cartridge is secure in the right carrier.
•
The paper is loaded correctly.
Note: Do not force paper into the printer.
•
There are no flashing error codes on the All-In-One display. For help, see
"Understanding error codes on the display" on page 9.
•
You installed the software. To check:
Windows:
From your desktop, click Start
If Lexmark 2200 Series does not appear in your list of programs, install the
All-In-One software.
Macintosh:
On your desktop, check to see if there is a Lexmark 2200 Series folder.
If it does not appear on your desktop, install the All-In-One software.
• Windows 2000
• Mac OS X version 10.1.5 or later
• Mac OS X version 10.2.3 or later
Programs (or All Programs).
5