Garden Gear G4801 사용 설명서 - 페이지 14

{카테고리_이름} Garden Gear G4801에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Gear G4801 17 페이지. 20v cordless telescopic chainsaw

페이지 인쇄

Storing the chainsaw

Clean all foreign material from the product. Store idle unit indoors in a dry

and well-ventilated area that is inaccessible to children. Keep away from

corrosive agents such as garden chemicals and de-icing salts.

Always place the scabbard on the saw bar when transporting or storing the

pole chain saw. The scabbard is a snug fit and must be attached very

carefully due to the sharp teeth on the saw chain. This is best done by

grasping the scabbard at one end, in the centre portion of the scabbard,

and carefully sliding it over the chain as shown. Use caution to avoid the

sharp teeth of the chain.

NOTE: The saw chain is very sharp. Always wear protective gloves when

handling the chain.

Troubleshooting

PROBLEM

Bar and chain

running hot

and smoking.

Motor runs, but

chain is not

rotating.

Cleaning and maintenance

•

Remove the battery pack from the tool before carrying out any

adjustments, service or maintenance.

•

Your tool requires no additional lubrication or maintenance.

There are no user serviceable parts in your tool.

•

Never use water or chemical cleaners to clean your tool, wipe clean

with a dry cloth always.

•

Store your tool in a dry place, keep the motor ventilation slots clean

keep all working controls from of dust.

POSSIBLE CAUSE

Check chain tension for

over tightened condition

Bar lube reservoir empty.

Chain tension too tight.

Check guide bar

and chain assembly.

Check guide bar and

chain for damage.

REMEDY

Tension chain. Refer to Chain

Tension earlier in this manual.

Check bar lube reservoir.

Retention chain. Refer to

Chain Tension earlier in this

manual.

Refer to Replacing the Bar

and Chain earlier in this

manual.

Inspect guide bar and chain