Avantik QS11 빠른 참조 매뉴얼

{카테고리_이름} Avantik QS11에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantik QS11 2 페이지.

QS11 Quick Reference Function Guide

1) Scroll to display Count, Sum or Travel

2) Reset Button – Press to reset Count or Sum

3) Select Section Thickness

4) Select Trim Thickness

5) Trim Button

a) Press & release to advance selected trim thickness

b) Press & hold until lit to advance selected trim thickness with each handwheel rotation

6) Course advance specimen to blade holder (illuminates when it reaches the end of its travel)

7) Retract specimen (illuminates when it reaches the end of its travel)

8) Turn chamber light on/off

9) Select Up – Press & hold to increase temperature

10) Select Down – Press & hold to decrease temperature

11) Memo Button

12) Defrost Time – Set the defrost time of day. Press and hold. Select with 9 & 10

13) Interrupt – Press to cancel the next defrost cycle. Press to cancel a defrost cycle when in an

automatic defrost.

•

Set Real Time – Press & hold 12 & 11. Select with 9 & 10

•

Activate Cryobar Peltier Cooling – Press 10 twice

•

Specimen Position Memory – Press & hold 11 until lit to store position. Press 11 to later return to

stored position.

•

Activate Immediate Manual Defrost – Press 12 & 2

•

Interrupt Manual Defrost – Turn the main power switch off. Wait 30 seconds and restart the

cryostat.