AVANTO 177IC1800P 사용자 설명서 - 페이지 6

{카테고리_이름} AVANTO 177IC1800P에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AVANTO 177IC1800P 11 페이지. 1800 watt countertop induction range with probe cooking

User Manual

Functions & Advantages

of Induction Cooking

Eddy currents

heat the bottom of

the cooking pot

Alternating

electromagnetic field

• The cookware must be magnetic. Before switching on the appliance always place the magnetic cookware

centered onto the cooking field.

Special notes for your safety:

• According to today's standards of knowledge, persons with pacemakers are not at risk. In case of

misuse or unfavorable situation, we cannot eliminate remaining risks. For persons with pacemakers, we

recommend consulting a doctor before using any induction cooking plates. Persons with a pacemaker

should keep a minimum distance of 60 cm to the device while in operation.

• To avoid any risks, do not place very big magnetic objects (i.e. griddles) onto the cooking zone of the glass

field. Do not place other magnetic objects other than cookware (i.e. credit cards, TV, radio, cassettes) near

or on the glass surface of the induction cooking plate when it is in operation.

• Place the appliance on a stable, flat, and large, dry surface to eliminate the risk of falling down. Do not

place the appliance on flammable surfaces (i.e. tablecloth). Do not place the appliance near or onto hot

surfaces or other strong heating devices (i.e. cookers, open fire, heater, etc.).

• It is recommended not to put metallic utensils (i.e. knives, pot or pan covers, etc.) on the cooking plate in

case of switching on the appliance, they might get hot.

• Do not insert any objects (i.e. wires, or tools) into the ventilation slots.

Attention! This may cause electrical shock.

• Do not touch the hot surface of the glass field. Please note: Even though the induction cooking plate does

not heat up during cooking, the temperature of the heated cookware heats up the cooking plate.

The system of induction cooking

The induction cooking plate and the cookware placed on it build up one unit by reason of electro-magnetism.

The emerging energy will change into heat directly in the bottom of the cookware.

This avoids heat loss which is caused by constant heating and warming on standard cooking plates. It is

not necessary to preheat the induction cooking plate. When connected, it is in "Standby Mode" without any

power consumption.

ca. 25KHz/60Hz

The bottom of the

cookware is made

of magnetic material

Control element