Lexmark 2480 - Forms Printer B/W Dot-matrix 빠른 참조 - 페이지 10
{카테고리_이름} Lexmark 2480 - Forms Printer B/W Dot-matrix에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 2480 - Forms Printer B/W Dot-matrix 19 페이지. Tech notes
Lexmark 2480 - Forms Printer B/W Dot-matrix에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (9 페이지), 설정 시트 (2 페이지), 기술 노트 (3 페이지)
페이지 인쇄
5
Pull up the left and right tractor locking levers to unlock the tractors.
Left
tractor
door
Locking
lever
6
Open the left and right tractor doors.
7
Place the paper pinfeed holes over the second or third pins of the tractor
unit.
If necessary, adjust the left or right tractor to fit the paper width.
8
Close the left and right tractor doors.
9
Set the left margin.
Move the tractor to align the left margin on your paper with the [A symbol
printed on the rear plate.
Keeping the left tractor positioned to the left of the rubber tractor stop
keeps your paper within the paper sensor area while in push tractor
position.
10
Push down the left tractor locking lever.
11
Adjust the right tractor to remove slack in the paper and lock the right
lever.
12
Close the front cover.
13
Press Load/Unload to load paper to the current Top-Of-Form.
14
Press Start/Stop to put the printer online.
10
Left
tractor
door
Locking
lever