Lexmark 2481 - Forms Printer B/W Dot-matrix 빠른 참조 - 페이지 11
{카테고리_이름} Lexmark 2481 - Forms Printer B/W Dot-matrix에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 2481 - Forms Printer B/W Dot-matrix 19 페이지. Tech notes
Lexmark 2481 - Forms Printer B/W Dot-matrix에 대해서도 마찬가지입니다: 기술 노트 (3 페이지)
페이지 인쇄
Loading a cut form or envelope manually
1
Clear the paper path.
2
If continuous forms are currently loaded, tear off any used forms and
press Load/Unload to park the continuous forms.
The Paper Out light is blinking.
3
Set the forms thickness lever.
For help, see "Setting the forms thickness lever" on page 7.
4
Move the paper select lever up to cut forms
5
Open the manual feed door.
6
Set the left margin.
Move the left paper guide so that the print start position you want aligns
with the [A symbol printed on the margin guide.
7
Place a cut form or envelope against the left paper guide.
8
Move the right paper guide against the right edge of the paper.
9
Insert paper into the printer until the Paper Out light stops blinking.
a
If Auto Cut Sheet Load is set to On, the paper feeds automatically to
the Top-Of-Form.
b
If Auto Cut Sheet Load is set to Off, press FormFeed.
10
Printer is online (Ready light On solid).
If it is not, press Start/Stop until the Ready light is On solid.
.
11