HIKVISION ERI-Q108-P8 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} HIKVISION ERI-Q108-P8에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION ERI-Q108-P8 14 페이지. Eri-q10 series network video recorder
페이지 인쇄
3
A C T I V A T I N G Y O U R D E V I C E
For the first-time access, you need to activate the device by setting an admin password. No operation is
allowed before activation. You can also activate the device via Web Browser, SADP, or client software.
1. Enter the same password in the Create
New Password and Confirm New
Password text fields.
2. Enter a different password for IP Camera
Activation (click
password to ensure you enter it correctly).
3. Click OK to save the password and
activate the device.
STRONG PASSWORD RECOMMENDED
We highly recommend that you create a
strong password of your own choosing
(using a minimum of eight characters,
including at least three of the following
categories: upper case letters, lower case
letters, numbers, and special characters) in
order to increase the security of your
product. We recommend that you reset
your password regularly. Especially in high
security systems, resetting the password
monthly or weekly can better protect your
product.
•
Using the Unlock Pattern for Login
You can configure a device unlock pattern for Admin login once the device is activated.
1. Use the mouse to draw a pattern among the nine
dots on the screen. Release the mouse when
the pattern is done.
Connect at least four dots to draw the pattern.
Each dot can be connected only once.
2. Draw the pattern again to confirm it. When the
two patterns match, the pattern is configured
successfully.
3. You can use the unlock pattern for future logins.
4
U S E R L O G I N
If the NVR logs out, you must log in to the device
before operating the menu and other functions.
1. Select the User Name in the drop-down list.
2. Enter the Password.
3. Click OK to log in.
If the admin enters the wrong password seven
times, the account will lock for 60 seconds. If an
operator enters the wrong password five times,
the account will lock for 60 seconds.
icon to show
Figure 1-1 Set Admin Password
Clear-text password is supported. Click
the password. Click again to hide.
Figure 1-2 Draw the Pattern
to show