HIKVISION HiLook Series 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} HIKVISION HiLook Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HiLook Series 18 페이지. Smart hybrid light bullet & turret camera
HIKVISION HiLook Series에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (20 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (17 페이지)

페이지 인쇄

3.7 Adding IP Cameras (NVR)

Purpose

Before you can get live video or record the video files, you should add the network cameras to the connection

list of the device.

Before you start

Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please

refer to the User Manual for activating the inactive IP camera.

Step 1 Go to Menu > Camera > IP Camera.

Step 2 Select the IP camera from the list and

click

to add the camera (with the

same admin password of the NVR's).

Step 3 (Optional) Check Enable H.265 (For

Initial Access) for the connected IP

camera supporting H.265. Then the IP

camera will be encoded with H.265.

3.8 Network Settings

3.8.1 Configuring General Settings

Purpose

Network settings must be properly configured before you operate DVR/NVR over network.

Step 1 Go to Menu > Configuration >

Network > General.

Step 2 Configure the general parameters of

network.

Step 3 Click Apply to save the settings.

3.8.2 Configuring HiLookVision

Purpose

HiLookVision provides the mobile phone application and platform service to access and manage your

connected DVR/NVR, which enables you to get a convenient remote access to the surveillance system.

Digital/Network Video Recorder Quick Start Guide

Figure 3-7 Add IP Camera

Figure 3-8 Network Settings