HIKVISION HiLook Series 사용자 설명서 - 페이지 7
{카테고리_이름} HIKVISION HiLook Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HiLook Series 18 페이지. Smart hybrid light bullet & turret camera
HIKVISION HiLook Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (20 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (17 페이지)
페이지 인쇄
4. Secure the mounting base to the ceiling with three
PA4 × 25 screws.
Figure 2-3 Attach the Mounting Base to the Ceiling
5. Pull out the clip plate and install the camera back to
the mounting base. Push the clip plate back in to
secure the camera.
6. Connect the cables.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure
below.
Tilt Position
[0° to 75°]
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
2). Move the main body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
8. Tighten the screw to finish the installation.
2.1.2 Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
1. Paste the drill template for junction box to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-2 Dissemble the Camera
Figure 2-4 Install the Camera
Pan Position
[0° to 360°]
Figure 2-5 3-Axis Adjustment
Rotation Position
[0° to 360°]